3CB9EF7

3Com CoreBuilder Fan Assembly

Speed : 0MHz

$402.31

F4D177

Belkin Cabinet Fan Unit

$103.34

217222-B21

Compaq Fan Upgrade Kit

Product Information Fan upgrade kit for the Compaq ProLiant DL360 Processor Speed : 0MHz

$94.50

210818-B21

Compaq Fan Upgrade Kit

Product Information Fan upgrade kit for the Compaq ProLiant DL380 Processor Speed : 0MHz

$94.50

4100-001-02

CRU Twin Fan Cooler Product Information Twin fan cooler with TCSS circuitry Prevent drive meltdown with hard drive temperatures as high as 120F! Reduces 3.5" hard drive temperatures up to 30% Two TCSS (Thermostatically Controlled Cooling Systems) Fans Hard drive activity LED Processor Speed : 0MHz

$18.53

D7073A

HP NetServer LXr 8000/LXr 8500 Service Kit

Product Information 220V Replacement redundant power supply and two redundant fans for the NetServer LXr 8000 and LXr 8500 series

$469.89

DS1411001

Nortel Passport Spare Fan Tray

Product Information Spare fan tray for the Nortel Passport 8010 10-slot chassis Features: Includes 8 fans on each tray and will still operate if one fan fails Includes a thermal sensor You can replace a fan tray without turning off power to the chassis

$745.02

DS1411002

Nortel Passport Spare Fan Tray

Product Information Spare fan tray for the Nortel Passport 8006 chassis Features: Includes 8 fans on each tray and will still operate if one fan fails Includes a thermal sensor

$723.68

3000-F1-007

Paradyne Comsphere 3000 Carrier Fan

Product Information 115V fan module for the Comsphere 3000 Needed when 5 fully loaded ComSphere 3000 carriers are in a single cabinet Processor Speed : 0MHz

$294.33

5325301261

Quantum Fan Kit

Product Information Fan kit for Snap server 4

$25.15

FANCASE2

StarTech.com FANCASE2 Case Fan

Product Information Customizable dual PC slot-mounted case-cooling fan Cool your computers to ensure peak performance and stable operation The FANCASE2 fits in any standard ISA or PCI slot space and has two fans with independent ducting systems. The default configuration for the fans is exhausting air from the case, but either fan can be reversed to inhale air into the case. Each fan is on a swivel and extension mechanism that allows the fan to be directed to a specific location. This provides optimal airflow where it is needed. The fan is powered using a standard LP4 hard driver power tap. Independent ducting system allows you to direct cooling where it is needed Air Flow: 18 CFM @ zero static pressure Connectors: LP4 (hard drive power connector) Rated Power: 2.28W

$23.00

FAN-P100PLUS

StarTech.com FAN-P100PLUS CPU Fan

Extra large heatsink and fan combination provide excellent cooling for your CPU

$5.20

FANP233

StarTech.com FANP233 CPU Fan

Product Information Slot 1/A Intel Pentium II and AMD Athlon CPU cooling fan aCool your computer to ensure peak performance and stable operation The StarTech Slot 1/A Pentium II/AMD Athlon CPU cooling fan is a combination heatsink and fan designed for cooling Intel Pentium II CPUs that use the original SECC plastic cartridge (233-400 MHz), or AMD Athlon CPUs. It sports an extra-large heatsink with enough cooling capacity for any CPU. A quiet running 5cm brushless ball bearing DC motor coupled with a high-efficiency blade design is capable of moving 9 CFM (cubic feet per minute) of air. Power is supplied to the fan using a 3-lead TX3 connector that plugs into the motherboard and allows the system to monitor fan speed and operating status. Specially designed for Pentium II 233+ CPUs Includes thermal conductive tape for improved heat transfer Steel clip provides a secure fit

$7.56

FAN-CASE

StarTech.com FAN-CASE Case Fan

Fan utilizes a quiet running brushless DC motor High efficiency fan-blade design is capable of moving 36 CFM Air Flow: 36 CFM at zero static pressure Connectors: LP4 Male to Female pass-through

$16.00

FANP2DUAL

StarTech.com FANP2DUAL CPU Fan

Features: Specially designed for Pentium II SECC-mounted CPUs Includes thermal conductive tape for improved heat transfer Steel clip provides a secure fit aCool your comp

$12.08

SNTFAN

StarTech.com SNTFAN Case Fan

Product Information Replacement ball bearing fan for removable drive drawer/mobile racks Cool your computer to ensure peak performance and stable operation Life Expectancy: 35,000 hours Noise Level: 32 dB Dimensions: 1.57" x 1.57" x 0.04"

$5.20

HDDSINKPRO

StarTech.com HDDSINKPRO Heatsink

Product Information 5.25" Heatsink for 3.5" hard drives with 2 fans The ultimate cooling system for hot-running 3.5 inch hard drives Super-cool that hard-drive with the HDDSINKPRO from StarTech.com. Featuring dual fans and a large extruded aluminum heat-sink, this cooler boasts a decrease in hard drive operating temperature of 40%. It mounts a 3.5-inch hard drive into a 5.25-inch drive bay and includes a vented front bezel with a cleanable air filter. Fans: 1.57 inches (4cm) Weight: 1.6 lbs.

$29.95

FANPOWER

StarTech.com FANPOWER Case Fan

Product Information 8.0 x 2.5 cm 2-lead wire case cooling fan Cool your computer to ensure peak performance and stable operation The StarTech.com 8cm x 8cm x 2.5cm (3 1/8" x 3 1/8" x 1") fan is designed as a replacement for PC power supply units. A quiet running brushless ball bearing DC motor coupled with a high efficiency blade design is capable of moving 32 CFM (cubic feet per minute) of air. Power is supplied to the fan from a connection point within the power supply. This model features bare tinned leads for power supplies without an internal connector where the replacement fan will be either soldered or spliced to the power leads.

$6.99

FANBOX

StarTech.com FANBOX Case Fan

Product Information 3.12 x 1.0" cm LP4 PC case cooling fan Cool your computer to ensure peak performance and stable operation The StarTech PC Case Cooling Fan is an add-in cooling fan designed to fit most computers. It can be used to circulate cool air into the case or exhaust warm air out, preventing problems due to overheating components. A quiet running brushless ball bearing DC motor coupled with a high efficiency blade design is capable of moving 32 CFM (cubic feet per minute) of air. Power is supplied to the fan using a power tap that is connected to the large LP4 power connector on a PC's power supply. Dimensions: 3.12" x 3.12" x 1"

$4.99

FANBOX2

StarTech.com FANBOX2 Case FAN

Product Information 8.0 x 2.5 cm TX3 PC case cooling fan operation The StarTech.com 8cm x 8cm x 2.5cm (3 1/8" x 3 1/8" x 1") PC case fan is an add-in cooling fan designed to fit most computers. It can be used to circulate cool air into the case or exhaust warm air out, preventing problems due to overheating components. A quiet running brushless ball bearing DC motor coupled with a high efficiency blade design is capable of moving 32 CFM (cubic feet per minute) of air. Power is supplied to the fan using a 3-lead TX3 connector that plugs into the motherboard and allows the system to monitor fan speed and operating status.

$6.04

FANDRIVE

StarTech.com FANDRIVE Case Fan

Product Information 5.25" drive bay hard drive cooler with three fans Cool your computer to ensure peak performance and stable operation The StarTech triple fan hard drive cooling kit provides maximum airflow for hot-running hard drives, preventing overheating failures and extending the life of the drive. The fan unit mounts in any free 5.25 inch half height drive bay, and the hard drive is mounted directly behind it using the supplied 3.5 inch to 5.25 inch adapter brackets. Fresh cool external air is drawn into the case through a removable, cleanable filter and blown directly over the hard drive by 3 quiet running ball bearing fans. Perfect for extending the life of hot running 7200 rpm, 10000, and 15000 rpm IDE and SCSI hard drives in servers.

$16.44

FAN5X1TX3

StarTech.com FAN5X1TX3 Case Fan

Features: Dual Ball Bearings for reliability and long life Tachometer pin on the TX3 motherboard connector provides system with fan operating status Dimensions: 50x50x10mm Rated Power: 1.08W Connectors: 3-lead TX with RPM sensor

$4.73

FANCELERON

StarTech.com FANCELERON CPU Fan

Product Information Slot 1 Intel Celeron/Pentium II CPU cooling fan Cool your computer to ensure peak performance and stable operation The StarTech Celeron CPU cooling fan is a combination heatsink and fan designed for cooling Slot 1 Celerons. A quiet running 5cm brushless ball bearing DC motor coupled with a high efficiency blade design is capable of moving 9 CFM (cubic feet per minute) of air. Power is supplied to the fan using a 3-lead TX3 connector that plugs into the motherboard and allows the system to monitor fan speed and operating status.Specifications: Fan Dimensions: 50x50x10mm Rated Voltage: DC 12V Connectors: 3-lead TX connector

$6.25

FANBOX92

StarTech.com FANBOX92 Case Fan

Product Information 9.2 x 2.5 cm LP4 PC case cooling fan Cool your computer to ensure peak performance and stable operation The StarTech 9.2cm x 9.2cm x 2.5cm (3 5/8" x 3 5/8" x 1") PC case fan is an add-in cooling fan designed to fit most computers. It can be used to circulate cool air into the case or exhaust warm air out, preventing problems due to overheating components. A quiet running brushless ball bearing DC motor coupled with a high efficiency blade design is capable of moving 37 CFM (cubic feet per minute) of air. Power is supplied to the fan using a standard LP4 (hard drive power connector) pass through plug.

$8.40

FANP2SECC

StarTech.com FANP2SECC CPU Fan

Product Information Slot 1 Intel Pentium II/III CPU cooling fan The StarTech Slot 1 Pentium II/III CPU cooling fan is a combination heatsink and fan designed for cooling Intel Pentium II and III CPUs that use the newer SECC2 cartridge. A quiet running 5cm brushless ball bearing DC motor coupled with a high-efficiency blade design is capable of moving 9 CFM (cubic feet per minute) of air. Power is supplied to the fan using a 3-lead TX3 connector that plugs into the motherboard and allows the system to monitor fan speed and operating status.

$6.25

FANBOX12

StarTech.com FANBOX12 Case Fan

Product Information 12.0 x 2.5 cm LP4 PC case cooling fan Cool your computer to ensure peak performance and stable operation The StarTech.com 12cm x 12cm x 2.5cm (4 3/4" x 4 3/4" x 1") PC case fan is an add-in cooling fan designed to fit most computers. It can be used to circulate cool air into the case or exhaust warm air out, preventing problems due to overheating components. A quiet running brushless ball bearing DC motor coupled with a high efficiency blade design is capable of moving 48 CFM (cubic feet per minute) of air. Power is supplied to the fan using a standard LP4 (hard drive power connector) pass through plug.

$12.24

FAN486

StarTech.com FAN486 CPU Fan

Product Information x486 Socket CPU cooling fan Cool your computer to ensure peak performance and stable operation The StarTech 486 CPU cooling fan is a combination heatsink and fan designed as a replacement cooler for 486 PCs. A quiet running brushless DC fan circulates air over the heatsink for improved heat dispersal. Power is supplied to the fan using a standard LP4 (hard drive power) connector. Connectors: LP4 Male to Female pass-through Noise Level: 22 dB Operating Voltage: DC 12V

$4.41

FANP1003LEAD

StarTech.com FANP1003LEAD CPU Fan

Product Information Socket 7/370 Intel Celeron/Pentium and AMD K6/K6-2 CPU cooling fan The StarTech Socket 7/370 CPU cooling fan is a combination heatsink and fan designed for cooling Socket 370 (PPGA) Celerons, Socket 7 Pentiums, AMD K6, K6-2, K6-3, and Cyrix chips. It sports a large heatsink with enough cooling capacity for even the newest and fastest processors. A quiet running 5 cm brushless ball bearing DC motor coupled with a high-efficiency blade design is capable of moving 9 CFM (cubic feet per minute) of air. Power is supplied to the fan using a 3-lead TX3 connector that plugs into the motherboard and allows the system to monitor fan speed and operating status.

$4.20

FANDURONTB

StarTech.com FANDURONTB CPU Fan

Product Information Socket AMD Duron CPU cooling fan Cool your computer to ensure peak performance and stable operation Keep your mission critical hardware cool while ensuring peak performance so that you can get your work done without having to worry about whether or not your tower is going to melt. Specifications: Air Flow: 23.2CFM Rated Speed: 4000 rpm Noise: 31dBA

$6.83

FAN5X1LP4

StarTech.com FAN5X1LP4 Case Fan

Product Information 5.0 x1.0 cm LP4 PC caes cooling fan Cool your computer to ensure peak performance and stable operation Overheating hardware can be a problem in most Server rooms. With StarTech's new LP4 Replacement Ball Bearing Fan, you can avoid problems to workstations. Dimensions: 50x50x10mm Airflow: 8.54 CFM Bearing System: Dual Ball Bearing

$6.99

FAN5X15LP4

StarTech.com FAN5X15LP4 Case Fan

Product Information 5.0 x 1.5 cm LP4 PC case cooling fan Cool your computers to ensure peak performance and stable operation. Features: Dimensions: 50x50x15mm Airflow: 11.7 CFM Rotation Speed: 5400 rpm Connectors: LP4 Molex internal power

$4.99

HDDHEATSINK

StarTech.com HDDHEATSINK Heatsink Fan

The StarTech Hard Disk Drive Cooler provides the extra cooling needed for today's high speed HDDs. The 1-piece unit consists of a large metal heatsink plate and a low profile fan motor that easily installs onto standard 3.5" hard drives. A quiet running 5.5 cm DC motor coupled with a high-efficiency blade design is capable of moving 18 CFM (cubic feet per minute) of air. Power is supplied to the fan using a standard LP4 (hard drive power connector) pass through plug. Specifications: Air Flow: 18CFM Voltage: DC 12V Dimensions: 4.5" x 3.9" x 0.4" Noise Level: 32dB

$18.65

FAN370

StarTech.com FAN370 CPU Fan

Product Information Socket 7/370 Intel Pentium III and AMD K6/K6-2 CPU cooling fan Cool your computer to ensure peak performance and stable operation The StarTech.com Socket 7/370 CPU cooling fan is a combination heatsink and fan designed for cooling Socket 370 Celerons, Socket 7 Pentiums, FC-PGA Pentium III, AMD K6, K6-2, K6-3, and Cyrix chips. It sports an extra-large heatsink with enough cooling capacity for Pentium III and Celeron CPUs up to 800MHz. A quiet running 6 cm brushless ball bearing DC motor coupled with a high-efficiency blade design is capable of moving 13.5 CFM (cubic feet per minute) of air. Power is supplied to the fan using a 3-lead TX3 connector that plugs into the motherboard and allows the system to monitor fan speed and operating status.

$7.25

FAN6X1LP4

StarTech.com FAN6X1LP4 Case Fan

Product Information 6.0 x 1.0 cm LP4 PC case cooling fan Cool your computer to ensure peak performance and stable operation Overheating hardware can be a problem in most Server rooms. With StarTech.com's new LP4 Replacement Ball Bearing Fan, you can avoid problems to workstations. Features: Dual Ball Bearing Connectors: LP4 Molex internal power Airflow: 15.97CFM

$7.99

FAN370PRO

StarTech.com FAN370PRO CPU Fan

Product Information Socket 7/370 Intel Celeron/Pentium III CPU cooling fan Cool your computer to ensure peak performance and stable operation The StarTech Socket 7/370 CPU Cooler with its 2cm fan cooling fan is a combination heatsink and fan designed to cool high-performance CPUs. It sports an extra-large heatsink with enough cooling capacity for Pentium III and Celeron CPUs up to 1.0GHz. A quiet running 6x2 cm brushless ball bearing DC motor coupled with a high-efficiency blade design is capable of moving 20.2 CFM (cubic feet per minute) of air. Power is supplied to the fan using a 3-lead TX3 connector that plugs into the motherboard and allows the system to monitor fan speed and operating status. Air Flow: 20.2CFM Fan Size: 60 x 60 x 20 mm

$9.83

ACS3414A-U0001

Toshiba Second Fan Module

Product Information Second fan module assembly for the Toshiba Magnia series Processor Speed : 0MHz

$341.73

ACS3424A-U0001

Toshiba Fan Module

Product Information Redundant fan module for the Toshiba Magnia series, SS3 chassis Processor Speed : 0MHz

$341.73

ACS3701A-U0001

Toshiba Fan Assembly

Product Information Redundant fan assembly for the Toshiba Magnia series Processor Speed : 0MHz

$190.72

ACS3702A-U0001

Toshiba Fan Assembly

Product Information Redundant fan assembly for the Toshiba Magnia series, SS3 chassis Processor Speed : 0MHz

$193.57

SR14

Tripp Lite SmartRack Panel Mount Dual Fan

Product Information Panel mount dual fan - 3U, 120V, mounts to rail for Tripp Lite rack enclosures

$189.51