High-performance Networking Functions

Highly efficient chained memory structure similar to the 82558, 82557, and 82596 enabling backwards compatible software

Dynamic transmit chaining with multiple priorities transmit queues

Full duplex support at both 10 and 100 Mbps operation

IEEE 802.3u Auto-Negotiation support

3 Kbyte Transmit FIFO and 3 Kbyte Receive FIFO

Back-to-back transmission support with minimum interframe spacing

IEEE 802.3x 100BASE-TX Flow Control support

Enhanced Adaptive Technology capabilities

Specifications

Mfr Part Number: PWLA8490SX

10/100/1000Mbps

CAT-5 Cabling

Compatible W/Fast Ethernet

Specifications

MFG-PART#: PWLA8490XT

10/100/1000 CONNECTIVITY;

1000BASE-T GIGABIT ETHERNET OVER COPPER;

PCI-X FOR CATEGORY 5;

EASY TO SCALE NETWORK BANDWIDTH, USE STANDARD CABLING;

COMPATIBLE W/ FAST ETHERNET, SUPPORTS 32/33, 32/66.

Easy, cost-effective migration to Gigabit Ethernet over Category 5 cabling.

High network performance and flexibility via PCI-X bus at 64 bit/133 MHz.

Specifications

Mfr Model Number: PWLA8492MT

Dual port

10/100/1000

32/64-bit

Two Gigabit Copper Server Connections in a Single PCI Slot

Specifications

Mfr Model Number: PWLA8490MT

10/100/1000

32/64-bit

PCI2.2

Remote Management Support (WfM, RIS, SNMP/DMI)

IEEE 802.3ab Compatibility

Intel 82545EM Gigabit Controller

Gigabit speeds on Category-5 cable networks

Compatible with Fast Ethernet

Specification

Mfr Model Number: PRO1000MT

MFG-PART#: PWLA8390MT

Connectors: RJ-45

Wiring Cat-5, 4-pair

IEEE Standard/Network Topology: 10BASE-T, 100BASE-TX, 1000BASE-T

Bus Type: PCI 2.2

Bus Speed 32/33, 32/66

Data Rate(s) Supported per Port: 10,100,1000 Mbps

Integrated Memory: 64 KB

Interrupt Levels: INTA

IEEE Support: 802.2 and 802.3ab

Data Path Width: 32-bit PCI

Hardware Certifications: FCC B, CE, BSMI B, VCCI B

Data Transfer Mode: Bus-master DMA

Controller—Processor: Intel® 82540EM

Typical Power Consumption: 800 mA @+5 VDC

Intel® 82540EM Gigabit Controller

Easy, cost-effective10/100/1000 migration over CAT-5 cabling

Compatible with Fast Ethernet and Ethernet

PCI 2.2 32-bit 33/66 MHz

10/100/1000 Mbps auto-negotiation

Specifications

MFG-PART#: 3C3FE574BT

Media: 10BASE-T and 100BASE-TX

Bus type: 16-bit

Specifications

Mfr Model Number:3CSOHO100-TX

Link auto-negotiation transparently configures 10 or 100 Mbps

Creating peer/peer and client/server LANs is plug-and-play easy

Standards compliant, including PC99, WfM, ACPI, and DMI

Drivers: Windows 98/95/NT

Management: 3Com® OfficeConnect® Network Assistant CD-ROM

Connector: RJ-45

Media: 10BASE-T/100BASE-TX

Bus: 32-bit PCI

Operating distance (10BASE-T): Category 3/4/5 UTP to 100 m (328 ft)

Specifications

3Com EtherLink 10/100 Mbps PCI NIC for complete PC management

Specifications

Specifications

Mfr Model Number:3C905B-COMBO

Connectors support legacy coaxial and UTP cabling

Link auto-negotiation transparently configures 10 or 100 Mbps

Standards-compliant, including PC99, WfM, ACPI, and DMI

Parallel Tasking® II performance accelerates PCI-bus throughput

3Com® EtherCD® CD-ROM simplifies setup and troubleshooting

Media: 10BASE2/10BASE5/10BASE-T/100BASE-TX

Connectors: BNC/AUI/RJ-45

Specifications

Model #

3C980C-TXM

Bus Type

PCI

Cables and Operating Distances

10 Mbps 10BASE-T: Category 3,4,5 UTP up to 100 m

100 Mbps 100BASE-TX: Category 5 UTP up to 100 m

Data rate(s)supported

10 and 100 Mbps

Data path width

32 bit

Data transfer mode

Target and bus-master DMA

System Requirements

32 bit PCI, PCI 2.1, 2.2

Connectors

TX:RJ-45 with 10/100 full-duplex auto-negotiation

Software Compatibility

Microsoft Windows 2000, Microsoft Windows NT 4.0, Novell NetWare 4.2 Server, Novell NetWare 5 Server, MS Server Design Guide 2.0

Network Interface

Ethernet IEEE 802.3 industry standard 10 Mbps baseband CSMA/CD (10BASE-T)and 100 Mbps baseband CSMA/CD (100BASE-T,FX)standards,10 Mbps baseband CSMA/CD (10BASE2 and 10BASE5).

LED

Specifications

Mfr Model Number: 3C996BT

Media: 10BASE-T/100BASE-TX/1000BASE-T

Connector: RJ-45

Bus: 32-/64-bit, 33/66 MHz PCI; 32-/64-bit, 33/66/100/133 MHz PCI-X

Operating distance: 10BASE-T: Category 3, 4, 5, 5e UTP up to 100 m (328 ft); 100BASE-TX/1000BASE-T: Category 5, 5e UTP up to 100 m (328 ft)

Specifications

Mfr Part Number:3C996B-T

Accelerate Fast Ethernet server connections to 1000 Mbps

64-bit PCI and PCI-X compatibility means faster transmissions with lower CPU utilization

Centralized, standards-compliant management lowers network administration time and total cost of ownership

PCI Hot-Plug lets you remove/replace server NICs without taking the server offline

TCP/UDP/IP checksum offloads reduce host CPU load for improved system performance

These autonegotiating 10/100/1000 Mbps NICs work with your existing Category 5 or Category 5e copper wiring.

High Performance Tri-Speed PCI 32-Bit IEEE Standard Compliant Adapter

10/100/1000 Mbps

Plug and play

NWay auto-negotiation

Easy to connect

Specifications

Mfr Model Number: DUB-E100

True 10/100Mbps Network Connectivity

Hi-Speed USB 2.0 Compatible

Auto 10/100Mbps Speed Detection

One upstream USB Type "B" receptacle port & One RJ-45 (10/100Mbps Dual-Speed) port

Specification

10/100MB Ethernet PCI-NIC w/ Wake On Lan

Compliant with IEEE802.3 10Base-T, IEEE 802.3u 100Base-T specifications, and IEEE 802.3x Flow Control

Supports IP Multicast packet filtering

Specifications

Mfr Part Number: DFE-538R

Specifications

MFG-PART#:DSB-650TX

USB Specification 1.1 compliant.

IEEE 802.3 and IEEE 802.3u 10/100Mb Dual Speed Ethernet Adapter.

One upstream (USB Type B receptacle) ; One RJ-45 (Dual Speed port)

Specifications

Mfr Model Number:SMC2208USB/ETH

Specifications

Mfr Model Number: SMC1255TX

32-bit, Fast Ethernet PCI Network Card

Supports 32-bit data transfer mode

Allows network management from remote locations

Fully auto-configurable upon power-up through the host computer’s BIOS setup program.

Featuring Wake on LAN technologies and an optional Boot ROM socket (PXE and RPL support)

Specifications

MFG Number: SMC1244TX

Dual speed 10/100Mbps

Weight:0.90lbs

32-bit PCI bus-master architecture

Auto-configurable upon power-up

Full Duplex and Auto-negotiation

Dianostics LEDs

Specifications

MFG Model Number:USB100M

One A-type USB Port

One RJ-45 10/100BaseTX Port For Connecting to a Network

18K Memory Buffer

Specifications

MFR Model Number:LNE100TX

EtherFast 10/100 PCI LAN Card

32-bit PCI

Features Wake-On-LAN (WOL) event management

Specifications

Mfr Model Number: PRO200WL

Ethernet

10/100 base

PCI

Specifications

Mfr Model Number: PRO200

Fast Ethernet

10/100 base

Specification

All major operating systems are supported

Retail box

10/100 Mbps auto-sensing capability

Use it in future 3.3-volt PCI systems, and in 5-volt PCI systems

Easy Plug and Play

Specification

All major operating systems are supported

10/100 Mbps auto-sensing capability

Specifications

10/100 Fast Ethernet

Specifications

Mfr Model Number: ZCF1400

CompactFlash size

Designed for WinCE PDA/Palm-sized or handheld PC with CompactFlash slot

Plug and play driver installation without user intervention

Designed for WinCE 2.0 or above and for Microsoft Windows 95/98/NT4.0/2000 and later

IEEE 802.3 10Base-T 10Mbps Ethernet

Connection to Notebook PCs by a CompactFlasch (50-pin) and PCMCIA (68-pin) converter

3.3V Low power standby modes provide maximum battery life

Specifications

Fast Ethernet

10/100 base